China wholesaler ODM/OEM CNC Machining Lathing Grinding Knurling Steel Worm Thread Rod Screw Rod Gear Shaft with Carbonization for Transmission/Gearbox screw conveyor end shaft

Product Description

 

Product Type

Manufacturer OEM Customized High quality Worm Gear and WormCNC turning, milling, drilling, grinding, wire EDM cutting etc.

Our Services

CNC Machining,Silicone And Rubber,Aluminum Extrusion,Mould Making,etc

Material

Aluminum,Brass,Stainless Steel,Copper,Plastic,Wood,Silicone,Rubber,Or as per the customers’ requirements

Surface Treatment

Anodizing,Sandblasting,Painting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving

Dimension

As customers’ request

Service Project

To provide production design, production and technical service, etc

Drawing Format

Auto CAD, CHINAMFG Works,UG, CAD/Step/STP

Testing Machine

Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on

Industry used

Machinery; heavy duty equipment; electronic device; Auto spare parts; optical telecommunication

Packing

Eco-friendly opp bag / EPE Foam /Carton boxes
As customer’s specific requirements

Trial sample time

7-10 days after confirmation

Delivery time

7-15 days after receive the payments

ZheJiang Sanrui Precision Co., Ltd. supplies cast iron and steel components in North China.
We have been in the business of these products since 2007 and export our products to the USA and EU.
We have following methods to produce:
1. Automatic line, model box at 900X900
2.Shell moulding
3.Lost wax casting
4.Machining from Tube, bar
5.Steel sheet cutting and machining
We have special advantage in the following products:
1. Components for agricultural equipment, construction and mining equipment, typical products include: wheel hubs, wheels, counter weight , 3
points for lifting system, etc.
2. Pump body, motor housing and valve body castings.
3. Concrete hose fittings
4. Pulleys, pulleys for glazing line.
Weight of castings we could supply: up to 5MT.
Dimension of castings: up to 2.5 Meter.
Material of castings: gray iron, ductile iron, carbon and alloy steel, investment stainless steel castings, etc .Our machine shop are equipped
with both engine lathe for rough machining and CNC, MCs for finishing to meet the tolerance requirement and at the same time to maintain
the lowest cost.
Physical Test: Hardness, Tensile strength, yield strength, elongation.
Chemical Test: C,Si,Mn,S,P and so on.
Surface treatment: Powder coating, Galvanization, Mirror polishing etc
We have experienced technicians, advanced equipment, modern and efficient management methods, reliable quality, and a policy of regarding
the customer as the heart of service will ensure the continuous and steady development of our company. You can count on our expertise,
including a staff foundry engineer, to assist in providing the best solution to lower the cost of your final products.
We will, as always, work together with our customers to seek opportunities for developing new market and products, to satisfy our customer
and the society.

Q: Who we are?
A: Professional manufacturer specialized in metal parts which over16 years of rich experience.

Q: What can we do for you?
 A:1) 100% local manufacturer    
    2) Best material selection      
    3) Best lead time and stable production      
    4) Rich experience on export business  
    5) Professional services 6.

Quality control.
Q: Why do you choose us?
A: Responsibility, Efficiency, Loyalty, Win-Win, Punctuality, Cost effectiveness.

Q: When could we cooperate?
A: Whenever you want.

Q: Where are we from?
A: We located at HangZhou,convenient transportation.

Q: How can  customize products?
A: Attach your drawings with details(Suface treatment,material,quantity and special requirements etc).

Q: How long can I get the quaotation?
A: We will give you the quotation within 8 hours(Considering the time difference).

Q: How can I get a sample for testing?
A: We will provide free or charged samples depends on the products.

Q: How long will produce the parts?
A: Normally within 10 working days ,we will arrange the produce schedule depends on the quantity and the delivery.

Q: What’s your payment terms?
A: We accept Paypal for small account, big amount, T/T is preferred.

Q: How about the transportation?
A: Samples by air (if not too heavy),otherwise by sea or air.

Q: What if the products we received are not good?
A: Contact us without hesitation,our special after-sales service will take the responsibilit

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Conveyer Equipment, Packaging Machinery, Food Machinery, Car
Spiral Line: Right-Handed Rotation
Samples:
US$ 7.9/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

screwshaft

Screw Sizes and Their Uses

Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

The major diameter of a screw shaft

The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

The pitch diameter of a screw shaft

When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

The thread depth of a screw shaft

Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.
screwshaft

The lead of a screw shaft

Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

The thread angle of a screw shaft

The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.
screwshaft

The tapped hole (or nut) into which the screw fits

A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

China wholesaler ODM/OEM CNC Machining Lathing Grinding Knurling Steel Worm Thread Rod Screw Rod Gear Shaft with Carbonization for Transmission/Gearbox   screw conveyor end shaftChina wholesaler ODM/OEM CNC Machining Lathing Grinding Knurling Steel Worm Thread Rod Screw Rod Gear Shaft with Carbonization for Transmission/Gearbox   screw conveyor end shaft
editor by CX 2023-10-12