China G6 Precision SWC20 Carbon Flexible Drive Shaft screw shaft que es

Item Description

 

Item Description

Product description

Linear shaft characteristics

Products

Linear shaft

Flexible shaft

Hollow shaft

Content

CK45, SUJ2

CK45

SUJ2

Warmth treatment

Induction hardened

Not hardened

Induction hardened

Floor hardness

HRC58±2

HRC15±3

HRC60±2

Surface area handled

Tough chrome plated

Tough chrome plated

Challenging chrome plated

Precision

h7, g6, h6

h7, g6

h7, g6, h6

Roundness

Max3.0µm

Max3.0µm

Max3.0µm

Straightness

Max5.0µm

Max5.0µm

Max5.0µm

Chrome thickness

20-30µm

30µm

30µm

Roughness

Max1.5µm

Max1.5µm

Max1.5µm

Approach machinized

Threading, diminished shaft dia,coaxial holes drilled and tapped, flats-single or a number of, important way, snap ring grooves, radial holes drilled and tapped, chamfering

Linear shaft description

ERSK Linear offers linear shafting in a assortment of distinct choices to fulfill a extensive range of consumer demands. Offered in hardened metal, CK45 content steel, SUJ2 substance metal, hollow steel , inch and metric, Simplicity Shafting maintains the best surface end for linear basic bearings and ball bearings.

· Sound spherical shafting is obtainable in inch measurements from 3/16″ via 4″ and metric dimensions from 3 mm through eighty mm

· Machining accessible on request

Higher Reliability

ERSK linear shaft has quite straight good quality manage expectations masking each and every creation process. With suitable lubrication and use, problems-free of charge operation for an extended time period of time is feasible.

Sleek Operation

The higher efficiency of linear shaft is vastly outstanding to traditional shaft. The torque necessary is less than 30%. Linear movement can be effortlessly altered from rotary movement.

Substantial Sturdiness

Rigidly picked materials, intense warmth dealing with and processing methods, backed by years of experience,have resulted in the most resilient linear shaft manufactured.

Induction linear shaft, Flexible linear shaft,

linear bearings shaft, hollow linear shaft,

hardened linear shaft, chromed linear shaft

Application

For fragile software in industrial application, equipment resource and automation software.

Linear Shafts – Technological Qualities.

Test linear shaft surface area roughness

the max roughness is Ra0.4um

Straight the linear shaft straightness:

We manage the traighness .05mm of linear shaft 300mm

Check hardness:

S45C materail induction linear shaft, the hardness is HRC55-58

GCr15 (SUJ2) materail induction linear shaft, the hardness is HRC58-sixty three

If flexible shaft, the hardness is primarily based on the shaft material by itself

Take a look at the linear shaft dia precision, as generally, h7 is the standard tolerance in our inventory, But we can offer you g6, h6 precision also. if any particular tolerance, we are CZPT to personalize them for you.

We can machinize all types of machining,

 

Relevant goods

Related goods

There are several varieties of merchandise we can offer, If you are intrigued in them, you should click on the photograph and see the specifics.

Manufacturing Movement

More than support

In excess of Provider

Packaging & Shipping

Packaging and transport

PP bag for each and every linear shaft, Standard exported carton exterior for little buy transport by international express, this kind of as DHL, TNT, UPS

Picket box exterior for massive amount or very lengthy linear shaft by sea, by air

 

Business Profile

Firm details

Our principle

 

US $60
/ Meter
|
1 Meter

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: H7, H6, G6
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 3/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Items

Linear shaft

Flexible shaft

Hollow shaft

Material

CK45, SUJ2

CK45

SUJ2

Heat treatment

Induction hardened

Not hardened

Induction hardened

Surface hardness

HRC58±2

HRC15±3

HRC60±2

Surface treated

Hard chrome plated

Hard chrome plated

Hard chrome plated

Precision

h7, g6, h6

h7, g6

h7, g6, h6

Roundness

Max3.0µm

Max3.0µm

Max3.0µm

Straightness

Max5.0µm

Max5.0µm

Max5.0µm

Chrome thickness

20-30µm

30µm

30µm

Roughness

Max1.5µm

Max1.5µm

Max1.5µm

Process machinized

Threading, reduced shaft dia,coaxial holes drilled and tapped, flats-single or multiple, key way, snap ring grooves, radial holes drilled and tapped, chamfering

###

G6 Precision SWC20 Carbon Flexible Drive Shaft

Test linear shaft surface roughness

the max roughness is Ra0.4um

Straight the linear shaft straightness:

We control the traighness 0.05mm of linear shaft 300mm

G6 Precision SWC20 Carbon Flexible Drive Shaft
G6 Precision SWC20 Carbon Flexible Drive Shaft

Test hardness:

S45C materail induction linear shaft, the hardness is HRC55-58

GCr15 (SUJ2) materail induction linear shaft, the hardness is HRC58-63

If flexible shaft, the hardness is based on the shaft material itself

Test the linear shaft dia precision, as usually, h7 is the normal tolerance in our stock, But we can offer g6, h6 precision too. if any special tolerance, we are able to customize them for you. G6 Precision SWC20 Carbon Flexible Drive Shaft
US $60
/ Meter
|
1 Meter

(Min. Order)

###

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: H7, H6, G6
Axis Shape: Straight Shaft
Shaft Shape: Real Axis

###

Samples:
US$ 3/Meter
1 Meter(Min.Order)

|
Request Sample

###

Customization:

###

Items

Linear shaft

Flexible shaft

Hollow shaft

Material

CK45, SUJ2

CK45

SUJ2

Heat treatment

Induction hardened

Not hardened

Induction hardened

Surface hardness

HRC58±2

HRC15±3

HRC60±2

Surface treated

Hard chrome plated

Hard chrome plated

Hard chrome plated

Precision

h7, g6, h6

h7, g6

h7, g6, h6

Roundness

Max3.0µm

Max3.0µm

Max3.0µm

Straightness

Max5.0µm

Max5.0µm

Max5.0µm

Chrome thickness

20-30µm

30µm

30µm

Roughness

Max1.5µm

Max1.5µm

Max1.5µm

Process machinized

Threading, reduced shaft dia,coaxial holes drilled and tapped, flats-single or multiple, key way, snap ring grooves, radial holes drilled and tapped, chamfering

###

G6 Precision SWC20 Carbon Flexible Drive Shaft

Test linear shaft surface roughness

the max roughness is Ra0.4um

Straight the linear shaft straightness:

We control the traighness 0.05mm of linear shaft 300mm

G6 Precision SWC20 Carbon Flexible Drive Shaft
G6 Precision SWC20 Carbon Flexible Drive Shaft

Test hardness:

S45C materail induction linear shaft, the hardness is HRC55-58

GCr15 (SUJ2) materail induction linear shaft, the hardness is HRC58-63

If flexible shaft, the hardness is based on the shaft material itself

Test the linear shaft dia precision, as usually, h7 is the normal tolerance in our stock, But we can offer g6, h6 precision too. if any special tolerance, we are able to customize them for you. G6 Precision SWC20 Carbon Flexible Drive Shaft

Screw Shaft Types and Uses

Various uses for the screw shaft are numerous. Its major diameter is the most significant characteristic, while other aspects include material and function are important. Let us explore these topics in more detail. There are many different types of screw shafts, which include bronze, brass, titanium, and stainless steel. Read on to learn about the most common types. Listed below are some of the most common uses for a screw shaft. These include: C-clamps, screw jacks, vises, and more.
screwshaft

Major diameter of a screw shaft

A screw’s major diameter is measured in fractions of an inch. This measurement is commonly found on the screw label. A screw with a major diameter less than 1/4″ is labeled #0 to #14; those with a larger diameter are labeled fractions of an inch in a corresponding decimal scale. The length of a screw, also known as the shaft, is another measure used for the screw.
The major diameter of a screw shaft is the greater of its two outer diameters. When determining the major diameter of a screw, use a caliper, micrometer, or steel rule to make an accurate measurement. Generally, the first number in the thread designation refers to the major diameter. Therefore, if a screw has a thread of 1/2-10 Acme, the major diameter of the thread is.500 inches. The major diameter of the screw shaft will be smaller or larger than the original diameter, so it’s a good idea to measure the section of the screw that’s least used.
Another important measurement is the pitch. This measures the distance between one thread’s tip and the next thread’s corresponding point. Pitch is an important measurement because it refers to the distance a screw will advance in one turn. While lead and pitch are two separate concepts, they are often used interchangeably. As such, it’s important to know how to use them properly. This will make it easier to understand how to select the correct screw.
There are three different types of threads. The UTS and ISO metric threads are similar, but their common values for Dmaj and Pmaj are different. A screw’s major diameter is the largest diameter, while the minor diameter is the lowest. A nut’s major diameter, or the minor diameter, is also called the nut’s inside diameter. A bolt’s major diameter and minor diameter are measured with go/no-go gauges or by using an optical comparator.
The British Association and American Society of Mechanical Engineers standardized screw threads in the 1840s. A standard named “British Standard Whitworth” became a common standard for screw threads in the United States through the 1860s. In 1864, William Sellers proposed a new standard that simplified the Whitworth thread and had a 55 degree angle at the tip. Both standards were widely accepted. The major diameter of a screw shaft can vary from one manufacturer to another, so it’s important to know what size screw you’re looking for.
In addition to the thread angle, a screw’s major diameter determines the features it has and how it should be used. A screw’s point, or “thread”, is usually spiky and used to drill into an object. A flat tipped screw, on the other hand, is flat and requires a pre-drilled hole for installation. Finally, the diameter of a screw bolt is determined by the major and minor diameters.
screwshaft

Material of a screw shaft

A screw shaft is a piece of machine equipment used to move raw materials. The screw shaft typically comprises a raw material w. For a particular screw to function correctly, the raw material must be sized properly. In general, screw shafts should have an axial-direction length L equal to the moving amount k per 1/2 rotation of the screw. The screw shaft must also have a proper contact angle ph1 in order to prevent raw material from penetrating the screw shaft.
The material used for the shaft depends on its application. A screw with a ball bearing will work better with a steel shaft than one made of aluminum. Aluminum screw shafts are the most commonly used for this application. Other materials include titanium. Some manufacturers also prefer stainless steel. However, if you want a screw with a more modern appearance, a titanium shaft is the way to go. In addition to that, screws with a chromium finish have better wear resistance.
The material of a screw shaft is important for a variety of applications. It needs to have high precision threads and ridges to perform its function. Manufacturers often use high-precision CNC machines and lathes to create screw shafts. Different screw shafts can have varying sizes and shapes, and each one will have different applications. Listed below are the different materials used for screw shafts. If you’re looking for a high-quality screw shaft, you should shop around.
A lead screw has an inverse relationship between contact surface pressure and sliding velocity. For heavier axial loads, a reduced rotation speed is needed. This curve will vary depending on the material used for the screw shaft and its lubrication conditions. Another important factor is end fixity. The material of a screw shaft can be either fixed or free, so make sure to consider this factor when choosing the material of your screw. The latter can also influence the critical speed and rigidity of the screw.
A screw shaft’s major diameter is the distance between the outer edge of the thread and the inner smooth part. Screw shafts are typically between two and sixteen millimeters in diameter. They feature a cylindrical shape, a pointy tip, and a wider head and drive than the former. There are two basic types of screw heads: threaded and non-threaded. These have different properties and purposes.
Lead screws are a cost-effective alternative to ball screws, and are used for low power and light to medium-duty applications. They offer some advantages, but are not recommended for continuous power transmission. But lead screws are often quieter and smaller, which make them useful for many applications. Besides, they are often used in a kinematic pair with a nut object. They are also used to position objects.
screwshaft

Function of a screw shaft

When choosing a screw for a linear motion system, there are many factors that should be considered, such as the position of the actuator and the screw and nut selection. Other considerations include the overall length of travel, the fastest move profile, the duty cycle, and the repeatability of the system. As a result, screw technology plays a critical role in the overall performance of a system. Here are the key factors to consider when choosing a screw.
Screws are designed with an external threading that digs out material from a surface or object. Not all screw shafts have complete threading, however. These are known as partially threaded screws. Fully threaded screws feature complete external threading on the shaft and a pointed tip. In addition to their use as fasteners, they can be used to secure and tighten many different types of objects and appliances.
Another factor to consider is axial force. The higher the force, the bigger the screw needs to be. Moreover, screws are similar to columns that are subject to both tension and compression loads. During the compression load, bowing or deflection is not desirable, so the integrity of the screw is important. So, consider the design considerations of your screw shaft and choose accordingly. You can also increase the torque by using different shaft sizes.
Shaft collars are also an important consideration. These are used to secure and position components on the shaft. They also act as stroke limiters and to retain sprocket hubs, bearings, and shaft protectors. They are available in several different styles. In addition to single and double split shaft collars, they can be threaded or set screw. To ensure that a screw collar will fit tightly to the shaft, the cap must not be overtightened.
Screws can be cylindrical or conical and vary in length and diameter. They feature a thread that mates with a complementary helix in the material being screwed into. A self-tapping screw will create a complementary helix during driving, creating a complementary helix that allows the screw to work with the material. A screw head is also an essential part of a screw, providing gripping power and compression to the screw.
A screw’s pitch and lead are also important parameters to consider. The pitch of the screw is the distance between the crests of the threads, which increases mechanical advantage. If the pitch is too small, vibrations will occur. If the pitch is too small, the screw may cause excessive wear and tear on the machine and void its intended purpose. The screw will be useless if it can’t be adjusted. And if it can’t fit a shaft with the required diameter, then it isn’t a good choice.
Despite being the most common type, there are various types of screws that differ in their functions. For example, a machine screw has a round head, while a truss head has a lower-profile dome. An oval-its point screw is a good choice for situations where the screw needs to be adjusted frequently. Another type is a soft nylon tip, which looks like a Half-dog point. It is used to grip textured or curved surfaces.

China G6 Precision SWC20 Carbon Flexible Drive Shaft     screw shaft que esChina G6 Precision SWC20 Carbon Flexible Drive Shaft     screw shaft que es
editor by czh 2023-01-08